Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 25.06.2025 00:18

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

but this device (an Inductor) … impedes the rapid changes in the current.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

Now when you have a certain ac resistance, then a current flows in a loop.

Heavily shorted AI stock is rapidly climbing the Fortune 500 - TheStreet

It also is a device that limits the change in current flow.

A circuit breaker is similar, but is resettable.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

How much weight will I lose in the first month on a keto diet?

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

[old diagram got deleted by accident]

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

Do you think that Airbnb is destroying neighborhoods throughout the US?

So, the voltage could go up to 500 volts, and the fuse will not open up.

An AC voltage/ current source, and an ac inductive load.

so, what happens?

Microsoft will finally stop bugging Windows users about Edge — but only in Europe - The Verge

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

These devices are installed between the “hot” and “neutral” and protective ground.

U.S. braces for heightened threats in wake of Iran strikes - Axios

(Dc diagram shown, AC is similar).

but I think this circuit , shows a few more pieces.

At least they know the answer if they wanted it.

How does it feel to be in a marriage without any love?

One

What is lightning?

a photo is worth a thousand words.

I see ugly guys dating gorgeous, "hot" women all the time. I, too, am not very attractive but I'm not doing well with the ladies. What's their secret?

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

For this case there are devices called Metal oxide varistors (MOV).

But… the neutral is now “floating” because of the 1 ohm resistance.

Selena Gomez Looks Unrecognizable With a Dramatic Retro Hair Transformation - instyle.com

2024–10–14 [Omar Gharbi Omar Gharbi ]

The third is lightning and “how it gets conducted into a home.”

What does a fuse do?

How long does it typically take for whey protein to have an effect on bodybuilding, weight loss, or weight gain?

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Witcher 4 Dev Wants Studio To Harness The "Scrappy Energy" That Made Witcher 3 So Successful - GameSpot

First Sentence:

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

The other is “what does a “fuse” do?”

Is the Donald Trump Bible any different from a regular Bible? Has Trump altered its contents?

The bolt then partially travels down the line to your home.

There are three different concepts here that are getting confused.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

At least 8 dead in shooting near Israeli and US-supported aid sites in Gaza - NPR

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

But it can get overloaded, and no longer works.

2024–10–10[John johnson John Johnson ]

Three observations from Real Madrid’s 3-1 win vs Pachuca - Managing Madrid

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

Trump insults Powell again as another top Fed official joins the call to lower interest rates - CNN

This is where the MOV conducts again, and dissipated the energy.

This one hit behind the barn.

It seems Mohan does not understand the difference between a comment and an Answer.

What is the most peculiar thing about the human brain?

I post the exact comment here.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

[image of Common-mode choke]

Here is a simplified AC power diagram.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

One is “what exactly is in a ‘surge protector’ ? ”

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

At one ohm, the resistor has a maximum of 1 watt power.

This is 'the assistant's answer'

This device then solves the entire problem.

He then describes Rainy Season and Lightning.

what exactly is a ‘surge’ protector?

nine

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

These are simplified answers to the original question, and does not change anything I wrote above.

Upvotes:

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

The MOV will conduct when the voltage exceeds 50% of line voltage.

This is where this question deviates from being a 'generic' question, and becomes more specific.

There are two important concepts here.

A fuse is a non-resetable over current circuit protector.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

Because the load is inductive, the current lags the voltage.(by a bit).

He then describes the function of a fuse.

He then asserts :

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

2024–10–16 [ OO OLAOYE OYEBODE ]

Edit 2024–10.

Barnstars:

In schematic diagrams this is the symbol for a fuse:

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

eight

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

the problem then depends on "how fast does the fuse operate?".